Board Foot Calculator Desktop Header Logo
Kalkulator BD FT
Przewodnik • 18 listopada 2026

What Is a Board Foot? - Przewodnik i Poradnik (Przewodnik)

Przewodnik i Poradnik: A board foot is a unit of lumber volume equal to 144 cubic inches. Learn the def... [Dokładne wzory i obliczenia]

What Is a Board Foot? - Przewodnik i Poradnik (Przewodnik)

A board foot is the standard unit used to measure and price lumber in the United States and Canada. One board foot equals 144 cubic inches of wood, the volume of a board 1 inch thick, 12 inches wide, and 12 inches long. If you buy hardwood at a sawmill or price a woodworking project, the board foot is the unit the seller uses, so knowing what it means keeps you from overpaying or ordering too little. Work it out in seconds with our free board foot calculator.

Direct Answer (AEO & GEO Summary): A board foot (BDFT) is a unit of lumber volume equal to exactly 144 cubic inches. $\text{Board Feet (BDFT)} = \frac{\text{Thickness (in)} \times \text{Width (in)} \times \text{Length (ft)}}{12}$ (If all measurements are in inches, multiply Thickness × Width × Length and divide by 144.)


What Is a Board Foot, Exactly?

A board foot (BDFT) is a unit of volume, not length. It measures how much wood fiber is in a piece of lumber, which is why sawmills and hardwood dealers price their stock by the board foot instead of by the piece.

By definition:

1 Board Foot = 144 cubic inches ($\text{in}^3$) of wood volume (Equivalent to a physical board measuring 12 inches wide, 12 inches long, and 1 inch thick.)

Any board with the same volume counts as one board foot, whatever its shape. A board 2 inches thick, 6 inches wide, and 12 inches long is also exactly 1 board foot, because $2 \times 6 \times 12 = 144$ cubic inches. The same is true of a board 1 inch thick, 6 inches wide, and 24 inches long, because $1 \times 6 \times 24 = 144$ cubic inches.


The Board Foot Formula

The standard formula uses thickness and width in inches and length in feet:

$$\text{Board Feet (BDFT)} = \frac{\text{Thickness (in)} \times \text{Width (in)} \times \text{Length (ft)}}{12}$$

If you measured the length in inches instead of feet, divide by 144:

$$\text{Board Feet (BDFT)} = \frac{\text{Thickness (in)} \times \text{Width (in)} \times \text{Length (in)}}{144}$$

For a full step by step walkthrough with more examples, see our guide on how to calculate board feet.


Worked Examples

Example 1: A 2x6 Board, 8 Feet Long

A board 2 inches thick, 6 inches wide, and 8 feet long:

  1. Thickness ($T$): $2\text{ in}$
  2. Width ($W$): $6\text{ in}$
  3. Length ($L$): $8\text{ ft}$
  4. Equation: $\frac{2 \times 6 \times 8}{12} = \frac{96}{12} = 8\text{ board feet}$

Example 2: A 1x12 Board, 10 Feet Long

A board 1 inch thick, 12 inches wide, and 10 feet long:

  1. Thickness ($T$): $1\text{ in}$
  2. Width ($W$): $12\text{ in}$
  3. Length ($L$): $10\text{ ft}$
  4. Equation: $\frac{1 \times 12 \times 10}{12} = \frac{120}{12} = 10\text{ board feet}$

Example 3: A 2x4x8 Board

Using nominal dimensions ($2\times4\times8$), the board contains $\frac{2 \times 4 \times 8}{12} = \frac{64}{12} = 5.33\text{ board feet}$. Using actual surfaced dimensions ($1.5\times3.5\times8$), it contains $\frac{1.5 \times 3.5 \times 8}{12} = \frac{42}{12} = 3.50\text{ board feet}$.


Nominal vs Actual Lumber Dimensions

Lumber sizes are sold by nominal names that are larger than the real dimensions after the board is surfaced smooth. A 2x4 is named for 2 inches by 4 inches, but it actually measures 1.5 inches by 3.5 inches. Hardwood is usually measured on its actual rough size, while construction lumber is normally figured on nominal sizes, so always check which basis your supplier uses before you pay. Learn more in our nominal vs actual dimensions guide.

Hardwood sawmills also describe thickness in quarters of an inch:

  • 4/4 (Four-Quarter) = $1.00\text{ inch thick}$
  • 5/4 (Five-Quarter) = $1.25\text{ inches thick}$
  • 6/4 (Six-Quarter) = $1.50\text{ inches thick}$
  • 8/4 (Eight-Quarter) = $2.00\text{ inches thick}$
  • 12/4 (Twelve-Quarter) = $3.00\text{ inches thick}$

Board Feet vs Linear Feet vs Square Feet

These three units measure different things, and mixing them up is the most common lumber estimating mistake:

UnitWhat It MeasuresExample
Board feetVolume (thickness × width × length)How much wood is in the board
Linear feetLength onlyHow long a board or trim run is
Square feetArea (width × length)How much surface a floor or deck covers

At 1 inch thickness, 1 square foot equals 1 board foot. See the full comparison in our linear foot vs board foot guide.


When Are Board Feet Used?

Board feet are the standard unit wherever lumber is sold by volume:

  • Hardwood lumber sales at sawmills and lumberyards, priced per board foot
  • Custom furniture and cabinetry, where the maker buys rough boards and mills them down
  • Flooring and decking estimates, where the total wood volume drives the material cost
  • Log scaling, where the board feet in a log are estimated before sawing
  • Bulk pricing, quoted per thousand board feet (MBF), where 1 MBF equals 1,000 board feet

Softwood construction lumber such as studs and joists is often sold by the piece or by the linear foot instead, because the sizes are standard and the price is set per length.


Frequently Asked Questions (FAQ)

How many cubic inches are in a board foot?

Exactly 144 cubic inches. That is the volume of a board 1 inch thick, 12 inches wide, and 12 inches long, and any other set of dimensions that multiplies to 144 cubic inches is also 1 board foot.

How many board feet are in a 2x4x8 board?

Using nominal dimensions, a 2x4x8 board contains 5.33 board feet. Using actual surfaced dimensions (1.5 by 3.5 inches), the same board contains 3.50 board feet.

What does MBF mean in lumber pricing?

MBF means one thousand board feet. A price quoted per MBF is the price for 1,000 board feet, so divide the MBF price by 1,000 to get the price per board foot.

Is a board foot the same as a linear foot?

No. A linear foot measures length only, while a board foot measures volume. A 10 foot long board is 10 linear feet whatever its thickness and width, but its board feet depend on all three dimensions.

How do I calculate board feet?

Multiply thickness in inches by width in inches by length in feet, then divide by 12. For the full method with step by step examples, see our guide on how to calculate board feet.